ENFORCER®
ENFORCER ® is a powerful deterrent which can be attached to an existing perimeter fence or used as a stand-alone fence. High tensile wires are spaced at a distance of 4 inches apart and a safe, high voltage pulse is sent down alternate wires every second. The wire alternates between live and earth or the system can be set to have every wire live. Intruders coming into contact with the high tensile wires feel a short, sharp, shock deterring them from climbing or cutting the fence.
High Performance
- Meets & Exceeds all recognized security standards
- Visual & physical intruder deterrent
- Shock, voltage & short circuit monitoring
- Cut & climb monitoring
- Single, dual and bipolar controller offers continuous monitoring & alarm
- Interfaces with standard security equipment
- Maximum U.V. Resistant Insulators
- Fiber optic compatible
|
|
Features
- Can be attached to an existing perimeter fence or used as a stand-alone fence
- Simply install / upgrade with module to module inter connectors for power supply and signal wires
- Electric-Fence controllers have an impeccable safety record.The high voltage pulses less than one thousandth of a second in duration
- Controller continuously monitors the Electro-Fence™ generating an alarm when pre-programmed conditions are met
- Any attempt to cut or climb the Electro-Fence™ is met by a non-lethal shock
- Attempts to short circuit, reduce the voltage or breach the fence in any way generates an immediate alarm
- Can be broken down into zones so that the controller immediately recognizes the attempted entry location
- Single or dual zone controllers,which are fence mountable
|
|
|
Specifications
|
No. of Zones |
1, 2, or 6 Zone Controller |
|
Fence Output Voltage |
10 KV |
|
Output Power |
2.5 J |
|
Alarm Voltage |
2, 3 or 4 KV Selectable |
|
Pulse Count Specifications |
2, 3 or 4 Missing Pulses Selectable |
|
Size Indicators per Zone |
Alarm LED, Fence Monitor LED |
|
Control Input No. of Zones |
12V up to isolated |
|
Alarm Output |
Normally closed dry contact |
|
Power Requirements |
24V DC or 110/230VAC |
|
Enclosure |
External IP56 |
|
Size |
500 x 400 x 150mm | |
 |
